- Products
- Mineral oil products (Stanhope Seta)
- Lubricants
- Shell Four Ball Machine
Shell Four Ball Machine
Determination of the frictional properties of oils and greases
Properties
- Version with shear stability head with temperature control Available (for CEC L-45-T-93 and ISO 26422) - Part 10-530-200
- Upgrade kit for tests according to ASTM D2266 and ASTM D4172
- Test duration adjustable via digital timer
- Safety shutdown when the set torque is exceeded
Description
A test ball is attached to a fixture and rotated against three permanently installed balls in a container containing lubricant. The digital speed controller has three factory pre-programmed settings. The load cell is adjustable in the range of 40 to 800kgF, and the applied load is shown on a digital display. The transmitted torque between the rotating and fixed balls is measured and displayed. The digital timer can be used to set the duration of the test. If the torque exceeds a preset value during a test or the balls wear out, the drive motor is automatically switched off.
Speed
1200 to 1760 U/min
Load range
40 to 800kgF
Time
0,1 s to 9999 h
Dimensions (H x W x D)
165 x 82 x 62 cm
Weight
180 kg
Mains
single phase, 220/240V 50/60Hz
ASTM D2266
ASTM D2596
ASTM D2783
ASTM D4172
CEC L-45-T-93
EN ISO 20623
IP 239
ISO 26422
DIN 51350
More products
High-Temperature Dropping Point Apparatus, manual
Determination of the dropping point of lubricating greases in a wide temperature range
Grease Worker, manual
Machining of lubricating greases to determine the fulling penetration