- Products
- Mineral oil products (Stanhope Seta)
- Lubricants
- Total Sediment Tester
Total Sediment Tester
Determination of the insoluble material content of distillate and residual fuel oils
Properties
- checks sediment up to 0.5% m/m
- Viscosities up to 55 mm²/s at 100 °C
- 10 ml Sample Volume
- 2 Filter cells
Description
The device consists of two filtration cells, heating (steam) and cooling (water) circuits, and a vacuum circuit with Buchner flask and gauge. Each filtration cell comprises a steam heated/water cooled brass cup with a sintered brass disk to support the microfibre filters. Supplied with a vacuum pump and a steam generator.
Sample volume
10 ml
Steam
100 °C
Vacuum
max. 40 kPa
Capacity tank steam generator
7.12 l (5.25 l usable)
Dimensions Tester (H x W x D)
40 x 47 x 18 cm
Weight Tester
8 kg
Steam generator dimensions (L x W x H)
220 x 400 x 280 mm
Weight
5.2 kg
Mains Steam generator
single-phase, 110/120V, 50/60Hz; 220/240V, 50/60Hz
ASTM D4870
IP 375
IP 390
ISO 10307-1
ISO 10307-2
More products
Particle counter AvCount Lite
Portable automatic particle counter for determining the size and distribution of particles in light and medium distillate fuels, including aviation fuel and kerosene, biodiesel, low viscosity oils and hydraulic oils.
Copper Corrosion Bath
Testing the corrosion effect of copper on aviation fuels, combustibles and lubricants.
Cleveland Flashpoint, semi-automatic
Semi-automatic determination of flash and fire point of petrochemical products according to Cleveland Open Cup (COC) test method