- Products
- Mineral oil products (Stanhope Seta)
- Lubricants
- Water Washout Tester
Water Washout Tester
Characterization of the water leaching of lubricating greases
Properties
- Control settings for water temperature
- Fine adjustment of water flow and test ring speed
- fast heating time
Description
The test bearing is mounted on a hub, and rotated by an electric motor and toothed belt at 600 rev/min. A peristaltic pump draws heated water from the tank, through a filter, and sprays it, via a 1mm capillary, onto the face of the bearing at a flow rate of 300ml/min. The temperature of the water is digitally controlled in the range of ambient to 80°C. The water containing washed out grease is collected in the tank, filtered and recycled. The front panel has controls for water temperature, fine adjustment of water flow rate and bearing rotational speed, and a jet bypass switch to allow pre-heated water to circulate without passing through the jet.
Rotation speed
600 ± 30 U/min
Bath volume
750 ml
Temperature Range
RT to 80 °C
Water flow rate
5ml/sec
Dimensions (H x W x D)
30 x 40 x 40 cm
Weight
24 kg
Mains
single-phase, 110/120V, 50/60Hz; 220/240V, 50/60Hz (switchable)
ASTM D1264
DIN 51807
DIN ISO 11009
IP 215