DE
CN- Products
- Plastics, composites, recyclates, compounds
- Electric
- Tracking Current Tester
Tracking Current Tester
The device is used to determine the tracking resistance of solid electrical insulation materials according to DIN EN 60 112 / IEC 60 112 / resp. VDE 0303 Teil 1.
Properties
- Device works fully automatically
- Setting options for test voltage, test current, switch-off time, drop size and number of drops
- Test voltage up to 950 V
Description
The CTI value indicates to which Voltage, the base material is not tracking shows, when 50 drops of a standardized electrolyte liquid are dropped. Measured on the surface of the specimen, with a drop every 30 seconds falls between two platinum electrodes. The functional structure allows, by fine adjustment of test voltage, current limit, turn-off time, drop size, number of drops and accurate tests make.
Test voltage
0 V to 600 V adjustable
Dimensions (W x H x D)
Control unit: 610 x 305 x 600 mm / Test unit: 610 x 550 x 450 mm
Weight
Control unit: approx. 35 kg (45 kg up to 950 V) / Test unit: approx. 30 kg (35 kg up to 950 V)
Mains
230 V
DIN EN 60112
IEC 60112
VDE 0303 Teil 1
UL 2597
More products
Cathodic Disbondment (CD-Tester)
The CD-Test unit tests the adhesion of plastic coatings on steel.
Glow wire flammability test
Test device for determining the glow wire flammability index (GWFI), the glow wire ignition temperature (GWIT), and the glow wire temperature (GWT).
Holiday detector
Device for non-destructive holiday detection of coatings via high voltage impulse technology