- Products
- Mineral oil products (Stanhope Seta)
- Lubricants
- BRUGGER-Tester
BRUGGER-Tester
Determination of the load capacity of lubricants in the range of mixed and boundary friction
Description
The measure of the load of the lubricant is determined in a friction system, consists of test cylinder, test ring and lubricant. The rotating test ring produces a wear surface on the fixed test cylinder. The ratio of contact pressure and wear surface is the load acc. to Brugger (N / mm ²). Analyzer The equipment is computerized and has been developed to analyze the lubricant according to Brugger. For measuring, the test specimen is inserted in a defined position in the device. Within a few seconds the measurement result is available. This can be read and analyzed from the database for further processing.
Measurement inaccuracy
< 0.1 mm
Repetition
< 0.04 mm
Dimensions (lubrication and load tester)
540 x 390 x 275 mm
Weight
33 kg
Mains
380 V, 50 Hz
Dimensions (evaluation unit)
250 x 150 x 200 mm
Mains
230 V, 50 Hz
DIN 51347-1
DIN 51347-2
More products
Herschel Emulsifier
Determination of the speed of water separation capacity of oils and synthetic liquids
Automatic Air Release Value Apparatus (Impinger ARV)
Determination of the air separation capacity of lubricating oils and hydraulic fluids
Friction and Wear Tester acc. to Reichert
Investigation of the load carrying capacity and wear reduction properties of lubricating and cutting fluids