DE
CN
Mineral oil products
Reichert Lubricant Tester – Friction and Wear
to inspect lubricant with respect to their load-bearing capacity.
Technical Data
Dimensions (WxDxH): 650 mm x 650 mm x 350 mm
Weight: ~ 60 kg
Mains: 230 V / 50 Hz or 115 V / 60 Hz available
Power: 1000 VA
Air: pressurized air (6-8 bar)
Cooling: An external cooling device can be attached to the fluid vessel for regulating the temperature of the test solution.
Manual Penetrometer
Manual penetrometer for determining the deformability (flowability/consistency) of plastic and elastic masses (lubricating greases, ointments, creams, pastes, bitumen) using penetration measurement
Technical Data
Measuring Range: 0-700 PEN (0-70 mm)
Resolution: 1 PEN (0.1 mm)
Semi-automatic Penetrometer
Semi-automatic penetrometer for determining the deformability (flowability/consistency) of plastic and elastic masses (lubricating greases, ointments, creams, pastes, bitumen) using penetration measurement
Technical Data
Measuring Range: 0-700 PEN (0-70 mm)
Resolution: 1 PEN (0.1 mm)
Digital automatic Penetrometer
Digital, automatic penetrometer with microcontroller and surface detector for determining the deformability (flowability/consistency) of plastic and elastic masses (greases, ointments, creams, pastes, bitumen)
Technical Data
Masuring Range: 0-300 PEN (corresponds to 0-30 mm)
Resolution: 0.01 mm
Penetration Time: freely adjustable from 0,01 s
Dimensions (W x D x H): 280 x 490 x 760 mm
Weight: 26 kg
Mains: 100/240 V, 50/60 Hz
Automatic Ignition Tester
Determination of the ignition temperature of flammable liquids and gases for the assessment of the hazard potential of these substances
Technical Data
Temperature Range: +65 °C to +650 °C
Test Methods: Predetermination, Method S, Manual Determination
Dimesions Control Box (W x D x H): approx. 76 x 62 x 24 cm
Dimensions Test Unit (W x D x H): approx. 46 x 36 x 73 (100 hochgefahren) cm
Weight: approx. 25 kg (Control Box), approx. 49 kg (Test Unit)
Mains: 400 V AC, 3/N/PE, 50 Hz, 16 A CEE Plug
Freezing point cryostat manual
Measurement of the freezing point of aviation fuels down to -65 °C with 2 lifting stirrers
BBR Bending Beam Rheometer
Test System for Determination of Flexural Creep Stiffness of Asphalt Binder at low temperatures
Technical Data
Test Temperature Range: -35 to +30°C
Resolution: ± 0.01 K
Force Range: 0 … 1962 mN
Dimensions (HxWxD): 750 x 980 x 580 mm
Weight: approx. 100 kg without accessories
Mains: 230/240 V, 50/60 Hz, 115 V, 60 Hz (optional)
Ring and ball tester, automatic
Automatic determination of the softening temperature of bitumen, bituminous mixtures, resins and thermoplastic adhesives
Road Tar Viscosimeter
Determination of the outflow time of bitumen and bituminous binders through a nozzle with a sample of 50 ml at 40 °C
Technical Data
Weight: 25 kg
Dimensions: 450 x 500 x 850 mm (Single place device)
Netzanschluss: 220 V, 50/60 Hz
Pressure Ageing Vessel PAV
Determination of the long-term ageing of bitumen and to simulate the aging of asphalt mix after 5 to 10 years.
Technical Data
Dimensions (L x W x H): 560 x 520 x 470 mm
Weight: 50 kg (empty)
Mains: 230 V, 50-60Hz