Elastomers

Coesfeld Catalogue

The Coesfeld-Catalogue shows a wide selection of our testing equipment for several applications.

DetailviewDatasheet as PDFQuestions?

Specimen punch dies

Choice of standard dies with individual manufacturing

DetailviewDatasheet as PDFQuestions?

Manual Toggle Press 25

Lever press for effortless cutting with forces up to 25 kN

Technical Data

Pressing force: 25 kN
Working stroke: 40 mm
Working height: 57-238 mm
Clamping spigot: Ø 20 mm
Table size W x D: 185 x 145 mm
Installation surface W x D: 185 x 300 mm
Weight: 61 kg

DetailviewDatasheet as PDFQuestions?

Pneumatic Toggle Press 60

Toggle press for pneumatic cutting with forces up to 60 kN

Technical Data

Pressing force: 60 kN
Working stroke: 40 mm
Working height: 87-310 mm
Clamping spigot: Ø 20 mm
Table size W x D: 305 x 210 mm
Installation surface W x D: 305 x 440 mm
Weight: 140 kg
Pressurized air: 3/8 ''
Mains: 230 V, 50/60 Hz, 50 W

DetailviewDatasheet as PDFQuestions?

Creep Tester (Electro-Drive)

Instrumented multi-station system for motor-driven creep and relaxation measurement

Technical Data

Maximal Test Load: 20 kN
Load Application: electro-mechanical
Programmable Load Cycles: possible
Travel: 200 mm
Travel Resolution: 0.025 µm
Froce Resolution: 0.04 % FN
Temperature Control: -40 °C to +250 °C
Temperature Consistency: ± 1 K
Dimensions (W x D x H): 800 x 1040 1820 x 2100 mm
Weight: 1,3 t to 1,8 t
Mains: 3~400 V N/PE

DetailviewDatasheet as PDFQuestions?

Universal Testing Machine (one column)

Small and economical UTM up to 5 kN test load

Technical Data

Force: 3 kN, 5 kN
Speed: 1-700 mm/min
Crosshead-distance: 66-500 mm or 66-1200 mm

DetailviewQuestions?

Vulcanisation sample molds

Steel molds for vulcanization of elastomer specimen. Steel molds for vulcanization of elastomer. Precise milling contours and set pins for exact and easy positioning. Large handles and screw inserts for simple separation of the plates after molding.

DetailviewQuestions?

DIN Abrader

Abrasion Tester

Technical Data

Sample loading force: 2,5 | 5 | 7,5 | 10 N (expendable to 12,5 | 15 | 17,5 | 20 N)
Maximum sample gripping length: 13 mm
Abrasion speed of the drum: 0.32 m/s
Dimensions (W x D x H): 760 x 360 x 320 mm
Weight: 50 kg
Mains: 100-240 VAC 50/60 Hz, 1A

DetailviewDatasheet as PDFQuestions?

LFT - Dynamic Linear Friction Tester

Instrumented Friction Tester

DetailviewDatasheet as PDFQuestions?

ICCA - Instrumented Chip and Cut Analyser

First quantitative judgement of Chip and Cut behavior

Technical Data

Dimensions (H x W x D): approx. 1240 x 1100 x 600 mm
Weight: approx. 300 kg
Mains: 380 … 480 V AC +10%/-15%, 3-phase (details on request)

DetailviewDatasheet as PDFQuestions?