Mineral oil products (Stanhope Seta)

Herschel Emulsifier

Determination of the speed of water separation capacity of oils and synthetic liquids

Technical Data

Bath volume: 5 Liter
Test temperature: 54 °C and 82 °C
Bath temperature stability: ± 1 °C
Stirring speed: 1500 ± 15 rpm
Dimensions (H x W x D): 890 x 450 x 450 mm
Weight (empty): 49.5 kg
Mains: 110 Vac, 50/60 Hz or 240 Vac, 50/60 Hz

DetailviewDatasheet as PDFQuestions?

Reichert Lubricant Tester – Friction and Wear

to inspect lubricant with respect to their load-bearing capacity.

Technical Data

Dimensions (WxDxH): 650 mm x 650 mm x 350 mm
Weight: ~ 60 kg
Mains: 230 V / 50 Hz or 115 V / 60 Hz available
Power: 1000 VA
Air: pressurized air (6-8 bar)
Cooling: An external cooling device can be attached to the fluid vessel for regulating the temperature of the test solution.

DetailviewQuestions?

Automatic Air Release Value Apparatus (Impinger ARV)

Determination of the air separation capacity of lubricating oils and hydraulic fluids

Technical Data

Dimensions (H x W x D): 82 x 44 x 50 cm
Weight: 29 kg
Mains: 110/240 V, 50/60 Hz

DetailviewDatasheet as PDFQuestions?

Grease Worker, electrical

For manipulating fats automatically

Technical Data

Speed: 60 ± 10 Strokes per minute
Kneading plate: 51 x 1/4 inch Holes (optional 270 x 1/16 inch Holes)
Dimensions (H x W x D): 46 x 37 x 50 cm
Weight: 38 kg
Mains: single-phase, 110/120V, 60 Hz; 220/240 V, 50/60 Hz

DetailviewDatasheet as PDFQuestions?

Grease Worker, manual

Machining of lubricating greases to determine the fulling penetration

Technical Data

Dimensions: 45 x 40 x 60 cm
Weight: 15 kg

DetailviewDatasheet as PDFQuestions?

Micro Grease worker (manual)

for half cone or quarter cone

Technical Data

½ Cone: 8 x 6.35 mm Holes
¼ Cone: 8 x 3.17 mm Hole

DetailviewQuestions?

Roll Stability Tester

Processing of lubricants similar to a stress in a ball or roller bearing

Technical Data

Rotation Speed: 165 1/min
Temperature Range: RT to 200°C
Dimensions (W x H x D): 700 x 730 x 690 mm
Weight: 70 kg
Mains: 220 V/ 240 V, 50 Hz

DetailviewDatasheet as PDFQuestions?

Foam Tester

Double quadruple bath test bath for determining the foaming properties of lubricating oils

Technical Data

Bath volume: 28 l
Temperature Range: RT to 100°C ± 0,5°C
Flowmeter: 94 ± 5 ml/min (per Flowmeter)
Dimensions (W x D x H): 480 x 400 x 700 mm
Weight: 50 kg
Mains: single-phase, 110/120V, 60Hz or 220/240V, 50/60Hz

DetailviewDatasheet as PDFQuestions?

BRUGGER-Tester

Determination of the load capacity of lubricants in the range of mixed and boundary friction

Technical Data

Measurement inaccuracy: < 0.1 mm
Repetition: < 0.04 mm
Dimensions (lubrication and load tester): 540 x 390 x 275 mm
Weight: 33 kg
Mains: 380 V, 50 Hz
Dimensions (evaluation unit): 250 x 150 x 200 mm
Mains: 230 V, 50 Hz

DetailviewDatasheet as PDFQuestions?

Existent Gum Solid Block Bath

Determination of the lubricating oil content in fuels via the determination of the exhaust vapor residue according to the blow-up method

Technical Data

Temperature Range: 140 °C - 260 °C ± 0,5°C
Overtemperature protection: 0 °C (adjustable)
Flow meter: calibrated for min. and max. steam/air flow rate
Dimensions (H x W x D): 45 x 35 x 50 cm
Weight: 45 kg
Mains: 220/240 V, 50/60 Hz or 220/240 V, 60 Hz

DetailviewDatasheet as PDFQuestions?