Mineral oil products (Stanhope Seta)

H2S Analyser

Determination of Hydrogen Sulfide in Fuel Oil

Technical Data

Measuring Range: 0-250 mg/kg H2S (0-250 ppm H2S)
Viscosity Range: up to 3000 mm2/s
Test Duration: 15 Minutes
Sample Volume: 1ml, 2ml, 5ml (depending on H2S concentration)
Dimensions (H x Wx D): 52 cm x 29 cm x 57 cm
Weight: 15 kg
Mains: 100/240 V, 50/60 Hz, auto-sensing universal power supply

DetailviewDatasheet as PDFQuestions?

MFT Multi Filtration Tester

Determination of filter blocking tendency (FBT) of fuels, gas oil, gas turbine fuel, kerosene, diesel, biodiesel and biodiesel blends.

Technical Data

Filter blocking tendency (FBT) range:: 1.0 to 30 (low value is better)
Filterability quality factor (FQF) range:: 100 to 1 (higher value is better)
Max. pressure: 200 kPa
Dimensions (H x W x D): 350 x 300 x 400 mm
Weight: 9.8 kg
Mains: 110/240 V, 50/60 Hz, 300 W

DetailviewDatasheet as PDFQuestions?

Cold Filter Blocking Tester (CFBT & CSCFBT)

Technical Data

Pump Capacity: 20 ml/min (adjustable in software)
Temperature Range: -5 ºC to +40 ºC
Dimensions (H x W x D): 355 x 520 x 540 mm
Weight: 15 kg
Mains: 82-262 V, 45-65 Hz

DetailviewDatasheet as PDFQuestions?

Salt-In-Crude Analyser

A portable instrument for determining the chloride (salts) content of crude oils

Technical Data

Conductivity range: 0.0 to 430.0 g/m³, Resolution: 0.1 g/m³
Temperature Range: -20 °C to 150 °C, Resolution: 0.1 °C
Dimensions (H x W x D): 20 x 7 x 3.5 cm
Weight: 1.6 kg
Mains: 9 Volt DC battery or power supply single phase 110/120/220/240, 50/60Hz

DetailviewDatasheet as PDFQuestions?

Destillation Apparatus

For testing gasoline, diesel, heating oil, aviation fuel, raw gasoline, solvents and similar products.

Technical Data

Distillation range: RT to 400 °C
Condenser Tank Volume: 7.2 Liter
Dimensions (H x W x D): 47 x 37 x 25 cm (Condenser) / 47 x 21 x 21 cm (Distillation unit)
Weight: 12 kg
Mains: single-phase, 110/120V or 220/240V, 50/60Hz (switchable)

DetailviewQuestions?

BBR Bending Beam Rheometer

Test System for Determination of Flexural Creep Stiffness of Asphalt Binder at low temperatures

Technical Data

Test Temperature Range: -35 to +30°C
Resolution: ± 0.01 K
Force Range: 0 … 1962 mN
Dimensions (HxWxD): 750 x 980 x 580 mm
Weight: approx. 100 kg without accessories
Mains: 230/240 V, 50/60 Hz, 115 V, 60 Hz (optional)

DetailviewDatasheet as PDFQuestions?

Ring and ball tester, automatic

Automatic determination of the softening temperature of bitumen, bituminous mixtures, resins and thermoplastic adhesives

DetailviewQuestions?

Road Tar Viscosimeter

Determination of the outflow time of bitumen and bituminous binders through a nozzle with a sample of 50 ml at 40 °C

Technical Data

Weight: 25 kg
Dimensions: 450 x 500 x 850 mm (Single place device)
Netzanschluss: 220 V, 50/60 Hz

DetailviewQuestions?

Pressure Aging Vessel PAV

Determination of the long-term aging of bitumen and to simulate the aging of asphalt mix after 5 to 10 years.

Technical Data

Dimensions (L x W x H): 560 x 520 x 470 mm
Weight: 50 kg (empty)
Mains: 230 V, 50-60Hz

DetailviewDatasheet as PDFQuestions?

Herschel Emulsifier

Determination of the speed of water separation capacity of oils and synthetic liquids

Technical Data

Bath volume: 5 Liter
Test temperature: 54 °C and 82 °C
Bath temperature stability: ± 1 °C
Stirring speed: 1500 ± 15 rpm
Dimensions (H x W x D): 890 x 450 x 450 mm
Weight (empty): 49.5 kg
Mains: 110 Vac, 50/60 Hz or 240 Vac, 50/60 Hz

DetailviewDatasheet as PDFQuestions?