Geltimer PST-1

Determination of the gelation time of reactive resins

Datasheet as PDF Questions?

Description

Geltimer PST-1 is very easy to perform and gives exceptionally good reproducibility. The automatically measurement can be performed for any reaction resin. The instrument is easy to operate and normally no maintenance necessary.
A stamper made of aluminium or stainless steel performs an up-down cycle in a test tube filled with resin. When the point of gelation is reached, the test tube is pulled up by the stamper. This stops the clock which was started at the beginning of the experiment and the gel time can be read of. With the probe temperature system the exothermic reaction can be measured. As a result of the modular layout the lower part of the housing can be extended to incorporate electric heating or a thermostatically controlled oil or water bath. The device has a USB port and will be delivered with software. The system and the measurement can be configured directly on the PC. The recorded data are displayed graphically and can be processed as a csv-file in other programs. The device can be used online or offline. In online mode, the measurements can be carried out comfortably, record and compare the measured data.