DE
CN- Products
- Surfaces and coatings
- Electric
- Cathodic Disbondment (CD-Tester)
Cathodic Disbondment (CD-Tester)
The CD-Test unit tests the adhesion of plastic coatings on steel.
Properties
- Various set-ups for up to 32 measuring stations and more
- Datalogger/software for current, voltage, temperature
- Camera System for visual evaluation available
- Proven longevity
Measuring stations
1 / 4 / 8 / 10 / 16 / 20 / 30 (depending on configuration)
Voltage
5 V
max. current
± 200 mA
Current ranges
200 mA
Dimensinos (H x W x D)
152 x 280 x 385 mm (4-place) / 152 x 560 x 385 mm (8-place) / 304 x 560 x 385 mm (16-place)
Weight
6 / 12 / 18 kg (depending on configuration)
Mains
230 V / 50 – 60 Hz oder 110 V / 50 – 60 Hz
ASTM G42
ASTM G8
CAN/CSA Z245.21
CAN/CSA-Z245.20
DIN 30670
DIN EN ISO 15711
EN ISO 21809-1
ISO 21809
BAW 2011
AS 3862
ASTM G80
ASTM G95
NF A 49-711
GBE-CW6
GSK RAL GZ 662
Datalogger
- highly precise, extreme low-noise USB data loggers
- Records saved in CSV format
- loggers are mounted inside our potentiostat
Camera System for visual evaluation
- Camera zooms into inspected area.
- Damage is to be recognized as a circle, which is
divided into segments at an even angle (picture: 12
segments, 30° angle) - For each segment the depth of disbonding is
measured in mm from the bore hole to the surface
defect.
More products
MTT - Mobile Tension Tester
Mobile testing device for determining the peeling resistance of plastic-coated steel pipes
Penetrometer for Pipes RP 3 Air
Pipe penetrometer for determining the indentation resistance of plastic coatings
GT - Gel Time Measurement (16/20/Auto)
Test equipment for determining the gel time and curing characteristics of thermosetting powder coatings and resins
Extrusion Plastometer MFR/MVR (Melt Flow Index Tester)
Device for MFI-measurement of meltmass flow rate and melt-volume flow rate