DE
CN
Electric
Ohm-meter for high resistance measurement
The precision resistance meter is used to measure volume, surface and leakage resistance, small currents and cable resistance
Technical Data
Dimensions (W x H x D): 340 x 150 x 300 mm
Weight: 6 kg
Mains: single-phase, 100 – 240 V, 50/60 Hz
Tracking Current Tester
The device is used to determine the tracking resistance of solid electrical insulation materials according to DIN EN 60 112 / IEC 60 112 / resp. VDE 0303 Teil 1.
Technical Data
Test voltage: 0 V to 600 V adjustable
Dimensions (W x H x D): Control unit: 610 x 305 x 600 mm / Test unit: 610 x 550 x 450 mm
Weight: Control unit: approx. 35 kg / Test unit: approx. 35 kg
Mains: 230 V
Glow wire flammability test
Test device for determining the glow wire flammability index (GWFI), the glow wire ignition temperature (GWIT), and the glow wire temperature (GWT).
Technical Data
Glow wire temperature range: 100 to 999 °C
Dimensions (W x H x D): 570 x 550 x 340 mm
Weight: approx. 27 kg
Mains: 230 V
Cathodic Disbondment (CD-Tester)
The CD-Test unit tests the adhesion of plastic coatings on steel.
Technical Data
Measuring stations: 1 / 4 / 8 / 10 / 16 / 20 / 30 (depending on configuration)
Voltage: 5 V
max. current: ± 200 mA
Current ranges: 200 mA
Dimensinos (H x W x D): 152 x 280 x 385 mm (4-place) / 152 x 560 x 385 mm (8-place) / 304 x 560 x 385 mm (16-place)
Weight: 6 / 12 / 18 kg (depending on configuration)
Mains: 230 V / 50 – 60 Hz oder 110 V / 50 – 60 Hz
Holiday detector
Device for non-destructive holiday detection of coatings via high voltage impulse technology
Technical Data
Test voltage: 5-35 kV in 0.1 kV Steps
Battery: Pb 6 V, interchangeable
Charger: 230 V, 50 Hz