DE
CN
Pipe coatings
Extrusion Plastometer MFR/MVR (Melt Flow Index Tester)
Device for MFI-measurement of meltmass flow rate and melt-volume flow rate
Universal Testing Machine (one column)
Small and economical UTM up to 5 kN test load
Technical Data
Force: 3 kN, 5 kN
Speed: 1-700 mm/min
Crosshead-distance: 66-500 mm or 66-1200 mm
Universal Testing Machine (two columns)
Universal tensile, compression and flexure testing machine with 10 kN, 20 kN and 50 kN test force, different stroke lengths and light ranges with various accessories.
Technical Data
Force: 10 kN, 20 kN, 50 kN
Speed: 1-600 mm/min or 0.03 209 mm/min
Crosshead-distance: 700 or 1200 mm
Column-distance: 400-800 mm or 420 mm
Cathodic Disbondment (CD-Tester)
The CD-Test unit tests the adhesion of plastic coatings on steel.
Technical Data
Measuring stations: 1 / 4 / 8 / 10 / 16 / 20 / 30 (depending on configuration)
Voltage: 5 V
max. current: ± 200 mA
Current ranges: 200 mA
Dimensinos (H x W x D): 152 x 280 x 385 mm (4-place) / 152 x 560 x 385 mm (8-place) / 304 x 560 x 385 mm (16-place)
Weight: 6 / 12 / 18 kg (depending on configuration)
Mains: 230 V / 50 – 60 Hz oder 110 V / 50 – 60 Hz
MTT - Mobile Tension Tester
Mobile testing device for determining the peeling resistance of plastic-coated steel pipes
Technical Data
Force Range: 50 – 2500 N
Peeling Angle: 90° (automatically readjusted)
Min. Pipe Diameter: 100 mm / 50 mm with special equipment
Max. Pipe Diameter: any, up to the flat surface
Dimensions (W x D x H): Peeling Unit: approx. 360 x 350 x 280 mm / Control Unit: approx. 550 x 600 x 200 mm
Weight: Peeling Unit: approx. 16 kg / Control Unit: ca. 32,6 kg
Mains: 230 V / 50 – 60 Hz or 110 V / 50 – 60 Hz
Mobile Tension Tester MTT M 500
Mains-independent mobile test instrument for measuring the peel resistance
Technical Data
Peeling Travel: max. 200 mm
Force measuring device: Hanging scale
Penetrometer for Pipes RP 3 Air
Pipe penetrometer for determining the indentation resistance of plastic coatings
Technical Data
Measuring stations: 3
Temperature range: RT + 10 °C to 300 °C
Temperature Stability: ± 2 °C
Tempering medium: Air
Dimensions (W x D x H): approx. 434 x 585 x 890 mm
Weight: approx. 55 kg
Mains: 230 V, 50/60 Hz
Penetrometer for pipes
Pipe penetrometer for determining the indentation resistance of plastic-coated pipes and fittings under the influence of weight and temperature
Technical Data
Measuring stations: 3 or 6
Temperature range: +30 °C ... +90 °C / +30 °C ... +130 °C / -10 °C... +95 °C (depending on configuration)
Dimensions (W x D x H): 580 x 350 x 420 mm (RP3) / 750 x 360 x 400 mm (RP3K) / 850 x 350 x 420 mm (RP 6)
Weight: 15 - 55 kg (depending on configuration)
Mains: 230 / 115 V, 50 / 60 Hz
Mobile impact tester for pipes
Mobile impact tester for testing the impact strength of pipe coatings
Technical Data
Dimension (W x D x H): 100 x 100 x 1000 mm
Weight: approx. 15 kg
Coating Thickness Meter
Measurement of all non-magnetic layers on steel and non-conductive layers on non-ferrous metals and stainless steel
Technical Data
Measuring ranges on steel: 0-15 mm depending on measuring probe type
Measuring ranges on non-ferrous metals and stainless steel: 0-8 mm depending on measuring probe type
Resolution: 1 – 100 μm: 0.1 μm / > 100 μm: 1 μm / > 2000 μm: 0.01 μm
Accuracy: below 100 μm: ± 1 μm / 100-1000 μm: ± 1 % / 1000-2000 μm: ± 3 % / > 2000 μm: ± 5 %
Dimensions (W x D x H): 160 x 80 x 27 mm
Weight: 150 g
Power supply: V battery (IEC 6 LF 22) a. W. 9 V battery rechargeable