DE
CN
Plastics, composites, recyclates, compounds
Creep Tester (Electro-Drive)
Instrumented multi-station system for motor-driven creep and relaxation measurement
Technical Data
Maximal Test Load: 20 kN
Load Application: electro-mechanical
Programmable Load Cycles: possible
Travel: 200 mm
Travel Resolution: 0.025 µm
Froce Resolution: 0.04 % FN
Temperature Control: -40 °C to +250 °C
Temperature Consistency: ± 1 K
Dimensions (W x D x H): 800 x 1040 1820 x 2100 mm
Weight: 1,3 t to 1,8 t
Mains: 3~400 V N/PE
Universal Testing Machine (one column)
Small and economical UTM up to 5 kN test load
Technical Data
Force: 3 kN, 5 kN
Speed: 1-700 mm/min
Crosshead-distance: 66-500 mm or 66-1200 mm
Universal Testing Machine (two columns)
Universal tensile, compression and flexure testing machine with 10 kN, 20 kN and 50 kN test force, different stroke lengths and light ranges with various accessories.
Technical Data
Force: 10 kN, 20 kN, 50 kN
Speed: 1-600 mm/min or 0.03 209 mm/min
Crosshead-distance: 700 or 1200 mm
Column-distance: 400-800 mm or 420 mm
ESCR - Environmental Stress Cracking Tester (Bell Test)
Measurement of environmental stress cracking
Technical Data
Temperature Range: RT + 10 °C to +150 °C
Temperature Consistency: ± 0.1 °C
Bath capacity: 24 l (10 stations) / 72 l (50 stations)
Dimensions (W x D x H): 526 x 440 x 476 mm (10 stations) / 1331 x 440 x 476 mm (50 stations)
Weight: 35 kg empty (10 stations) / 75 kg empty (50 Stations)
Mains: 230 V, 50 Hz (alternative mains connection on request)
Fogging Tester
Evaluation of undesirable evaporation and condensation of volatile and semi-volatile organic substances.
Quartz Tube Dilatometer
System for measuring the coefficient of linear expansion of plastics
Dynamic Universal Testing Machine
Electrodynamic Test Stand for instrumented fatigue and lifetime testing
Technical Data
Force: 3500 N
Stroke: 50 mm
Frequency: 50 Hz
Sampling rate: 1000 Hz
Dimensions (D x W x H): 900 x 1200 x 1700 mmm
Weight: 650 kg
Mains: 3~400 V N/PE, 50/60 Hz
Biaxial Test Stand
Test Stand for biaxial sample load
BTT - Brittleness Temperature Tester
Determination of the temperature at which plastics, which are not rigid at normal ambient temperature, exhibit brittle failure under specified impact conditions
Technical Data
Temperature: -80 °C to ambient
Drop speed: 2 m/s
Abmaße (H x B x D): approx. 1.470 x 460 x 810 mm
Weight: approx. 120 kg
Mains: 230 V / 50 Hz (optional: 230 V / 60 Hz or 115 V / 60 Hz)
Cathodic Disbondment (CD-Tester)
The CD-Test unit tests the adhesion of plastic coatings on steel.
Technical Data
Measuring stations: 1 / 4 / 8 / 10 / 16 / 20 / 30 (depending on configuration)
Voltage: 5 V
max. current: ± 200 mA
Current ranges: 200 mA
Dimensinos (H x W x D): 152 x 280 x 385 mm (4-place) / 152 x 560 x 385 mm (8-place) / 304 x 560 x 385 mm (16-place)
Weight: 6 / 12 / 18 kg (depending on configuration)
Mains: 230 V / 50 – 60 Hz oder 110 V / 50 – 60 Hz