DE
CN
Plastics, composites, recyclates, compounds
IDT 660/1500 - Instrumented Dart Tester
Free falling dart test with puncture energy measurement
Technical Data
Drop Height: 660 or 1500 mm
Drop Weight: 50 g to 3000 g
Dimensions (D x W x H): 460 x 330 x 1340 or 2170 mm
Weight: approx. 60 kg
Compressed Air Supply: 6-10 bar
Mains: 230 V, 50/60 Hz
Extrusion Plastometer MFR/MVR (Melt Flow Index Tester)
Device for MFI-measurement of meltmass flow rate and melt-volume flow rate
Kofler heating bench
Determination of melting point, observation of decomposition processes and volatility and determination of softening point of synthetic resigns
Technical Data
Dimensions (W x D x H): 430 x 100 x 140 mm
Weight: 2.5 kg
Mains: 230V, 50/60Hz
Pourability
Funnel for measurement of the pourability of free flow powder or granulate
Technical Data
Funnel: Ø 110 mm, 40° angle
Dimensions (W x D x H): 290 x 160 x 210 mm
Weight: approx. 7.5 kg
Bulk Density / Apparent Density
Funnel for measurement of the apparent density of free flow powder or granulate according to above listed standards
Technical Data
Funnel: Height: 115 mm, volume approx. 200 ml
Measuring cup: 100 ±0.5 m
Dimensions (W x D x H): 260 x 160 x 210 mm
Weight: ca. 3.5 kg
Pourability and bulk density
Combined system to measure both pourability and apparent/bulk density.
Technical Data
Funnel: Ø 110 mm, 40° angle
Dimensions (W x D x H): 290 x 160 x 210 mm
Weight: approx. 8 kg
Bulk Density ASTM D1895
3 models for determination of bulk density acc. to ASTM D 1895 Method A, Method B or Method C
Apparent Density Tester for Activated Carbon ASTM D2854
Tester for determination of the apparent density of granular activated carbon in accordance with ASTM D2854.
Creep Tester mechanical
Multi-station testing system for creep measurement with weight sets
Technical Data
Maximum Test Load: 500 N / 5 kN
Load Application: Dead Load/ Lever 10:1
Travel: 100 mm
Travel Measurement Resolution: optional
Force Measurment Resolution: optional
Temperature Control: optional
Temperature Consistency: optional
Dimensions (D x W x H): 800 x 1040-1820 mm x 2100 mm
Weight: depending on configuration
Mains: depending on configuration
Creep Tester (Electro-Drive)
Instrumented multi-station system for motor-driven creep and relaxation measurement
Technical Data
Maximal Test Load: 20 kN
Load Application: electro-mechanical
Programmable Load Cycles: possible
Travel: 200 mm
Travel Resolution: 0.025 µm
Froce Resolution: 0.04 % FN
Temperature Control: -40 °C to +250 °C
Temperature Consistency: ± 1 K
Dimensions (W x D x H): 800 x 1040 1820 x 2100 mm
Weight: 1,3 t to 1,8 t
Mains: 3~400 V N/PE