DE
CN
Surfaces and coatings
Geltimer GT-S
Device for determining the gel time of reactive resins in accordance with the standards DIN 16916, DIN 16945, DIN EN ISO 9396
Geltimer PST-1
Determination of the gelation time of reactive resins
Technical Data
Dimensions Base Unit (ØxH): 130 x 361 mm
Weight Base Unit: 2.5 kg
Mains Base Unit: 230 VAC / 24 VAC, 50 / 60 Hz
Dimensions Heating Block (Ø): 130 mm
Mains Heating Block: 100 VAC … 240 VAC, 50 / 60 Hz
Geltimer GT-SP
Determination of the gelation time of reactive resins
Technical Data
Dimensions Measuring Head: Ø 130 mm
Dimensions Tripod (WxDxH): 200 x 250 x 540 mm
Weight: 4.5 kg
Mains: 230 VAC / 24 VAC, 50 / 60 Hz
MTT - Mobile Tension Tester
Mobile testing device for determining the peeling resistance of plastic-coated steel pipes
Technical Data
Force Range: 50 – 2500 N
Peeling Angle: 90° (automatically readjusted)
Min. Pipe Diameter: 100 mm / 50 mm with special equipment
Max. Pipe Diameter: any, up to the flat surface
Dimensions (W x D x H): Peeling Unit: approx. 360 x 350 x 280 mm / Control Unit: approx. 550 x 600 x 200 mm
Weight: Peeling Unit: approx. 16 kg / Control Unit: ca. 32,6 kg
Mains: 230 V / 50 – 60 Hz or 110 V / 50 – 60 Hz
Mobile Tension Tester MTT M 500
Mains-independent mobile test instrument for measuring the peel resistance
Technical Data
Peeling Travel: max. 200 mm
Force measuring device: Hanging scale
Penetrometer for Pipes RP 3 Air
Pipe penetrometer for determining the indentation resistance of plastic coatings
Technical Data
Measuring stations: 3
Temperature range: RT + 10 °C to 300 °C
Temperature Stability: ± 2 °C
Tempering medium: Air
Dimensions (W x D x H): approx. 434 x 585 x 890 mm
Weight: approx. 55 kg
Mains: 230 V, 50/60 Hz
Penetrometer for pipes
Pipe penetrometer for determining the indentation resistance of plastic-coated pipes and fittings under the influence of weight and temperature
Technical Data
Measuring stations: 3 or 6
Temperature range: +30 °C ... +90 °C / +30 °C ... +130 °C / -10 °C... +95 °C (depending on configuration)
Dimensions (W x D x H): 580 x 350 x 420 mm (RP3) / 750 x 360 x 400 mm (RP3K) / 850 x 350 x 420 mm (RP 6)
Weight: 15 - 55 kg (depending on configuration)
Mains: 230 / 115 V, 50 / 60 Hz
Mobile impact tester for pipes
Mobile impact tester for testing the impact strength of pipe coatings
Technical Data
Dimension (W x D x H): 100 x 100 x 1000 mm
Weight: approx. 15 kg
Coating Thickness Meter
Measurement of all non-magnetic layers on steel and non-conductive layers on non-ferrous metals and stainless steel
Technical Data
Measuring ranges on steel: 0-15 mm depending on measuring probe type
Measuring ranges on non-ferrous metals and stainless steel: 0-8 mm depending on measuring probe type
Resolution: 1 – 100 μm: 0.1 μm / > 100 μm: 1 μm / > 2000 μm: 0.01 μm
Accuracy: below 100 μm: ± 1 μm / 100-1000 μm: ± 1 % / 1000-2000 μm: ± 3 % / > 2000 μm: ± 5 %
Dimensions (W x D x H): 160 x 80 x 27 mm
Weight: 150 g
Power supply: V battery (IEC 6 LF 22) a. W. 9 V battery rechargeable
Holiday detector
Device for non-destructive holiday detection of coatings via high voltage impulse technology
Technical Data
Test voltage: 5-35 kV in 0.1 kV Steps
Battery: Pb 6 V, interchangeable
Charger: 230 V, 50 Hz